The temperature within the home is fine, however the indoor fan runs all the time. what is wrong?
Sometimes householders flip the fan switch to “On” versus “Auto” that causes the indoor fan to run continuously. flip the switch to “Auto” and therefore the fan ought to stop running continuously.
Is there any advantage to setting my thermostat fan to “On” that the fan runs constantly?
Yes, there are one or two. First you just get constant filtering of the air in your home. The second is that as a result of the air is moving, you have got a additional even temperature throughout the house. However, continuous fan mode throughout the cooling season might not be applicable in humid climates. If the within of your home feels uncomfortably humid, it’s suggested that the fan be employed in “Auto” mode.
Why could be a matched system important?
A matched system is vital for a range of reasons. One is comfort. When all our elements are properly sized to your home, you’ll management precisely what proportion heating or cooling you wish thus you’ll relax. Also, a properly sized matched system allows each part to perform as designed, that means correct cycle times are maintained, humidity is controlled, and system sound is minimized. one more reason matched systems are necessary is potency. the general public get systems that are too giant for his or her homes, that means they pay to heat and funky area that won’t even there. A matched system printed by a dealer who has completed a load calculation for your home provides simply the proper quantity of heating and cooling you wish thus you get the foremost price for your utility greenback.
The air coming back from the registers feels cool when my new heat pump is about for heating. Is there a problem?
While a heat pump is perfectly capable of effectively heating your home, the temperature of the air starting of the registers is heated to concerning ninety to ninety five degrees, looking on the out of doors temperature. This temperature is approximately twenty – twenty five degrees hotter that the indoor air temperature and can heat your house. It is, however, below body temperature (98.6 degrees) and may feel cool when somebody puts their hand within the airflow.
What is the aim of auxiliary heat?
Under traditional operating conditions, the auxiliary heat is brought on automatically by the thermostat when the indoor temperature drops throughout heat pump operation. There are times throughout cold, wet weather when the out of doors coil could ice up and your heat pump can go into a defrost cycle. this is often nothing over reversing the method back to cooling mode. Cooling mode makes the out of doors coil hot and melts any ice. The defrost cycle ought to solely last many minutes and then come back to heating mode. throughout the defrost cycle, your comfort system is in cooling mode and therefore the offer air is cool. To offset this cool air, the auxiliary heat are energized throughout defrost. A mist or fog could also be visible from the out of doors unit throughout defrost.
How long will a typical furnace and air conditioner last?
On average, a furnace or air conditioner can last ten – twenty years. typically it pays to switch the previous system sooner due to the upper potency (lower gas and electrical bills) provided by newer equipment. Life expectations will vary greatly. the most important factors influencing life expectancy are correct installation and regular maintenance. Maintenance could be a should to maximize potency and defend your investment.
What goes into putting in a brand new system?
If you put in a brand new system, most of the things from the “What happens after I replace my previous system?” can got to be put in moreover. Beyond equipment, the foremost necessary part put in with a brand new system is that the ductwork. This consists of 2 elements, offer and come back. offer duct is hooked up to the outflow of the new system, delivering air to every zone in an exceedingly home. the quantity of air reaching every zone is decided by the dimensions of offer ductwork connecting it to your system. James Thomas Air can assist you confirm the dimensions of all the provision ductwork in your home. The second a part of the ductwork, the come back duct, attaches to the inlet of the new system and attracts air out of the areas to be heated or cooled. hooked up to the come back duct is that the filter. The filter ought to be placed as with reference to the furnace or air handler as potential. Ductwork may be either ductboard, versatile duct, or metal and should be properly sized so as to evenly distribute the right quantity of air to every space.
My electrical and gas bills are high. can a brand new furnace and air conditioner lower my bills?
YES! A brand new thirteen SEER air conditioner or heat pump may prevent the maximum amount as five hundredth on your operating price of the system. thirteen SEER is that the minimum potency commonplace allowed by law. looking on your current operating prices, high potency systems may prevent even additional. Newer gas furnaces are thirty – four-hundredth additional economical than some older models. With rising gas costs, this might mean massive savings.
What is SEER?
This stands for Seasonal Energy Efficiency Ratio. the dimensions of an air conditioner is rated in BTU or Tons, but the potency is rated in SEER. This ratio is calculated as cooling output divided by the facility input for the typical U.S. climate. It’s like MPG (miles per gallon) in an exceedingly automotive – the upper the MPG (or SEER) the lower the gasoline (electricity) bill.
What is a heat pump? Is it higher than an air conditioner?
A heat pump is an electrical powered piece of kit that each heats and cools your home. Within the summer, a heat pump is not any totally different than an air conditioner. Within the winter a heat pump operates in reverse and heats the indoors. Heat pumps want auxiliary heat (electric heat or gas furnace) to assist them when it’s terribly cold (below forty two degrees within the North Georgia Mountains) or when the thermostat is moved over two – three degrees at a time. The initial investment for a heat pump is over for an air conditioner, and therefore the ductwork should be precisely right for correct operation. One common grievance of a heat pump is that the air starting of the registers isn’t hot enough (compared to a gas furnace). With all their drawbacks, heat pumps can scale back the winter heating bills. However, the savings compared to heating with gas is dramatic and you’ll most likely need to remain with a heat pump.
Is it okay to install a special whole of furnace (or air conditioner) to figure with my existing air conditioner (or furnace)?
Most brands can work with others as long because the coils and blowers are the right size. You may, however, expertise some loss of potency and capability.
Some rooms in our house are too hot (or cold). will this be fixed?
Certainly. There are a range of causes for airflow issues. Typically the issues are thanks to a unclean filter, coil, and/or blower which ends in reduced air flow passing through the air handler and inflicting the air to die off within the outer branches of the duct system. From time to time the duct work comes loose and a minor reattachment repair will solve the matter. In an exceedingly heap of cases, there are duct style problems. In these cases, we ought to be brought in to troubleshoot things. Solutions will vary from some straightforward air balancing to replacement of ducts to advanced climate management systems like a zone system.
How do I obtain my new system?
For installation of latest equipment, we tend to don’t need any down payment, but we tend to raise for payment the day we tend to complete the installation (unless different arrangements are created in advance). You can pay with cash, checks, VISA and Mastercard.
In terms of preventative maintenance, why cannot my air conditioner and furnace be checked at constant time rather than one within the spring and one within the fall?
They should be checked and cleaned to make sure they’re operating efficiently, properly, and safely. we tend to suggest checking the air conditioner within the spring and therefore the furnace within the fall in order that we will absolutely operate the system to see its operation. When checking your refrigerant level in your air conditioner, we tend to acquire a additional correct reading at higher out of doors temperatures.
Should I actually have a brand new programmable thermostat put in with my new system?
Programmable thermostats are a wonderful tool to save lots of energy. you’ll program the thermostat in order that it raises and lowers the temperature automatically to coincide along with your desires. they’re notably effective when your household is on an everyday schedule and therefore the program operates continuously. apart from lowering your energy bill, a programmable thermostat offers further comfort (i.e. awaken to a heat lavatory.)
What am i able to do to keep up my furnace?
Your forced-air heating system can perform additional efficiently (i.e. prevent cash on energy bills and repair costs) if you…
- Examine filters once a month and replace them once they are dirty.
- Make certain air offer and come back vents in your home don’t seem to be obstructed. make certain nothing is in front of them or on high of them like furniture, curtains, boxes, toys, etc.
- Check chimney and venting systems once a year for secure fittings, leaks, corrosion, or damage.
- Keep space around furnace clean and litter free. Keep a minimum of three – four feet totally clear all the approach around your furnace.
- Don’t block the supply of furnace combustion air by enclosing furnace in an exceedingly tiny closet or by creating the area it’s located in too air tight.
- The furnace has to pull air from its immediate surroundings.
- If your system operates on propane gas, often check your propane gas share to form positive you are doing not run out.
What am I able to do to keep up my air conditioner or heat pump?
Regular maintenance can extend the lifetime of your equipment and scale back repair prices. Here are some straightforward tasks that ought to be done.
- Keep debris, grass clippings, dirt, and leaves removed from out of doors unit.
- Use a hose to clear the aluminum fins from airborne debris (Be careful, the fins bend easily. Use an everyday hose while not a twig nozzle, and a really soft brush with light-weight to no pressure).
When ought to I replace my furnace?
Furnaces eventually wear out rather like any piece of machinery. Your skilled HVAC service technician can see sure indicators that tell them your furnace is sporting out. a number of those symptoms are:
- Frequent pilot light-weight outages
- Delayed ignition
- Yellow flame or wavering flame
- Excessive soot or corrosion
- An excessive amount of or too very little heat
- The smell of sulfur or burnt eggs
Frequently, equipment homeowners start thinking about replacing their units when the frequency and prices of repairs become a much bigger headache than the price of replacing the unit.
How do I choose the proper heating/cooling system?
First, make certain the unit is correctly sized. Wecan offer a load calculation for your home. additionally your contractor ought to offer an energy analysis to see operating price. Next, think about any comfort problems within the home. Some product will scale back air stratification and uneven temperatures from space to space. If you have got allergies, an internal unit with an ECM motor can enable you to flow into the air in your home continuously whereas filtering the air for concerning constant price as operating a regular light-weight bulb. Finally, apprehend your budge parameters and therefore the potency of the system being proposed. will the system provide a payback? In different words, can the monthly savings over time offset the price of the new unit or potency possibility being considered? There are several factors to contemplate when choosing a brand new heating and/or cooling system.
How will we tend to improve the potency of an existing heating and cooling system while not replacing the furnace or the air conditioner and while not adding additional insulation?
First and foremost is MAINTENANCE. The equipment has to be cleaned and serviced by a licensed skilled a minimum of twice per year. Studies have shown that lack of correct maintenance will scale back equipment potency by five – 100 percent. additionally, most of today’s filters got to be modified a minimum of each ninety days, and do not skimp on the filter. you ought to use a filter that encompasses a high potency rating to assist keep your air and equipment clean. when thorough cleaning of your equipment, the service technician can alter the Freon levels in your air conditioner to the manufacturer’s specifications. An over charged unit is simply as dangerous as an underneath charged unit when it involves energy consumption. On the heating facet, the burners ought to be cleaned for optimum performance, moreover as adjusting the gas pressure, and cleaning the blower wheel. Program eight hour or bigger blocks of your time and no over seven degree changes are suggested.
How usually ought to I actually have my air ducts cleaned and inspected for repairs?
In the majority of homes, cleaning and inspection once each 3 years is adequate. the kind of air filter you’re using and therefore the frequency of maintenance on your heating and air con equipment will have a major impact on the length between cleanings. the acquisition of an honest quality air cleaner can defend your heating and air con equipment, duct system, and your home, whereas scheduled maintenance can extend the lifetime of the equipment and increase its potency.
My furnace uses propane gas and is blowing cold air, is there something I ought to check?
Check your propane tank to form positive you have got gas. to see the tank, flip open the dome lid on high of the tank. check up on the gauge. it’ll have numbers (percentages) from zero to one hundred. make certain the needle isn’t on zero.
